Mitsubishi FR-D700 series inverter - FR-D720S-100SC-EC
Specifications
Brand:
Mitsubishi
AC Drive Brand:
D700 Series Ultra Compact Inverters
AC Drive Phase:
Single-phase input
AC Drive Current High Load:
10A
AC Drive Voltage:
200-240V, 50/60Hz
Enclosure:
IP20
AC Drive Temp:
Fan Cooling
Filter Included:
With Filter
Mounting Type:
Panel mounting
Product Details
Mitsubishi D720 Series AC Frequency Inverter, type: FR-D720S-100SC-EC, for 2.2kW (3HP) 230V 3 Ph motor in VxF or Vector control to 10A. Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor.
Overload - 150% x 60 Seconds and 200% for 0.5 seconds.
Speed Control Range - 0.2-400Hz.
Braking - 30% rated to 60 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page to select a suitable resistor.
Features - Front Mounted Potentiometer, 2 x Analogue Inputs, 5 Digital Inputs, 1 Analogue output, 1 Relay Contact set and 1 digital output.
Programmable from a pc via FR-Configurator software (V30010-E), or from the 10 key hand-held parameter unit (see Linked Products below).
EMC Filters - None. See linked products below for external footprint EMC Filter Module.
'Safe Stop' function to SIL 2.
Input Current - not specified.
Input Voltage - 200-240V single phase -15%, +10% at 50/60Hz +/- 5%.
Cubicle or enclosure mounting.
Rated at 50C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm up to 40C, or 10mm above 40C.
Ventilation space in front - 10mm.
Heat Loss at max output - 110W.
Mounting via 4 x 5mm holes for rear mounting.
140mm Wide x 145mm Deep x 150mm high in IP20 case.
Weight is 1.9kg