Mitsubishi FR-E700 series inverter - FR-E740-095SC-EC

Mitsubishi FR-E700SC Series AC Frequency Inverter, type: FR-E740-095SC-EC for 3.7kW (5HP) 3 Phase motor in VxF or Sensorless Vector control to 9.5A. Simple set-up with 400V three phase input for a standard AC Induction motor. Overload - 150% x 60 seconds, 200% x 3 seconds Speed Control Range - 0.2Hz to 400Hz. Braking - To 150 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page. 2 Analogue Inputs, 7 Digital Inputs, 1 Analogue Output, 2 Digital Outputs, 2 Relay Contact Sets, Modbus RTU, integrated USB port. 'Safe stop'function to SIL2 Input Current - 12.5A. Input Voltage - 380-480V Three Phase +10% -15% at 50/60Hz ñ5% EMC Filters - Not included (see linked products below for external EMC filter module) Wall mount in clean environment or cubicle mount. Rated -10ø to 50øC Ambient. Ventilation space in front - 10mm Ventilation space above and below - 100mm. Ventilation space at sides - 0mm (10mm when surrounding air temperature exceeds 40øC). Mounting via 4 x 5mm diameter holes at rear on 128mm x 138mm centres. Size 3B - 140mm Wide x 141mm Deep x 150mm High. IP20 This is the replacement for the obsolete FR-E740-095-EC and FR-Z240-4.0 Can be used as an alternative or to replace FR-E740-3.7K, FR-E740-095-NA or FR-E740-3.7K-CHT subject to the differences detailed in the FR-E700 Overseas Specification Comparison document (see link to PDF below).