Low Graphics Version
  Thursday, 3 September 2015
Welcome to ACP&D Limited
 

Label applicator controls

ACP&D Limited's labelling equipment portfolio comprises label applicator ( for label printing ) and bottle labelling controls include the TranStep 3 & 4 enclosed controllers, EuroStep 3 & 4 chassis mounted stepper drives and Star2000 stepping motor drives are used for printer label control and incorporate specialised software specifically for labelling applications and 'print-mark' output. Labelling Equipment
 
Select a range below to see what labelling equipment products are available:

TranStep label applicator controller
Eurostep-3 stepping motor drive
Star2000 stepping motor drive: APS

TranStep

Complete label applicator controller incorporating: power supply inc. transformer; stepper drive; isolator; emergency stop; controls; etc. Labelling equipment for control of label applicators with stepping motor phase currents up to 10A.
 
Typically labelling equipment applications: label applicators & bottling plant

EuroStep

Chassis mounted stepping motor drives with print mark output for use with stepping motors with phase currents up to 10A.
 
Typically labelling equipment applications: Label applicators

Star2000

Enclosed stepping motor drives with print mark output for use with stepping motors with phase currents up to 12A.
 
Typical labelling equipment applications: Bottling plant


stepping motors, steppers, stepper motors, step motors, shrittmotoren, moteurs pas a pas, motor paso paso, realtime control
Downloads
To download each file, right-click and choose 'Save Target As'.

Datasheets

[File] EuroStep datasheet for labelling machinery with print mark output. DC version: ES3-AO/S4 (271.2 kB)

[File] EuroStep datasheet for labelling machinery with print mark output. AC version: ES3-AO/S4 (248.3 kB)

Manuals - Labelling Applications

[File] EuroStep Manual for the ES4-AP/S11 stepping motor driver for labelling applications (585.8 kB)

[File] Bottle labelling manual (142.6 kB)

The following are an explanation of some of the part numbers for the Star2000 drivers used in labelling machine applications:
 
D28
open collector output, no encoder input.
S48 out1 relay, out 2 open collector, with encoder input
S51 out 1 and 2 relay, with encoder input
 
There are more versions available upon request

[File] Manual for APSx- D38, S47 & S51 (869.9 kB)

[File] Manual for APSx-B-OP D38, S47 & S51 stepping motor driver for labelling applications (934.3 kB)

© 1998-2012 ACP&D Limited - All Rights Reserved


 Created with Site Editor Website Builder