Low Graphics Version
  Thursday, 3 September 2015
Welcome to ACP&D Limited
 

EuroStep with print-mark

Eurostep driver for label applicators

There is a specially designed labelling equipment version of the EuroStep stepper driver (ES3-AP/SN and ES4-AP/SN) which is specifically designed for labelling machines, examples of which are label applicators and bottling plant.
 
It is the EuroStep which is incorporated into our complete enclosed label applicator controller series 'TranStep'.
 
With the EuroStep it is possible in many cases for the use of a PLC to be eliminated entirely. These units are controlled by simple 'Start' and 'Stop' inputs from sensors. The speed setting can be from a potentiometer and the acceleration/deceleration ramps are set up from within the EuroStep. The number of steps after the EuroStep receives the stop signal can also be adjusted via a DIP switch. When the motor stops the EuroStep outputs a 'print mark' signal which the labelling machine can use to apply a label or print a bar code, etc..

For labelling equipment applications both the EuroStep 3 & 4 are available for use with either an ac or a dc power supply. The part numbers are:
 
ES3-AO/S4 (16-60Vac, up to 7A output)
ES3-AP/S41 (25-85Vdc, up to 7A output)
 
ES3-AO/S4 (25-85Vdc, up to 10A output)
ES3-AP/S4 (16-60Vac, up to 10A output)

To purchase the product you require select from the list below:


EuroStep3

For stepping motors up to 6A

Back to top

[ES3-A0/S4 EuroStep3 step motor drive]ES3-A0/S4 EuroStep3 step motor drive
EuroStep3 - For label application, dc power supply
[More Information - Buy Now]
193.47
[ES3-AP/S4 EuroStep3 step motor drive]ES3-AP/S4 EuroStep3 step motor drive
EuroStep3 - For label application, ac power supply
[More Information - Buy Now]
202.02

EuroStep4

For stepping motors up to 10A

Back to top

[ES4-A0/S4 EuroStep4 step motor drive]ES4-A0/S4 EuroStep4 step motor drive
EuroStep4 - For label application, dc power supply
[More Information - Buy Now]
212.77
[ES4-AP/S4 EuroStep4 step motor drive]ES4-AP/S4 EuroStep4 step motor drive
EuroStep4 - For label application, ac power supply
[More Information - Buy Now]
229.59

Stepper motor, stepping motor, step motor, hybrid stepper motor, permanent step motor, sonceboz, 2-phase step motor
Downloads
To download each file, right-click and choose 'Save Target As'.

Datasheets

[File] EuroStep datasheet for labelling machinery with print mark output. DC version: ES3-AO/S4 (271.2 kB)

[File] EuroStep datasheet for labelling machinery with print mark output. AC version: ES3-AO/S4 (248.3 kB)

© 1998-2012 ACP&D Limited - All Rights Reserved


 Created with Site Editor Website Builder